Shanghai Calyang Plastic Products
TEL:+86 17321328732
E-mail: sales@caiyangbelt.com

Modular plastic chain plate supplier

What Is Activated Ball Modular Conveyor Belt

Admin2026-11-11 

An activated ball modular conveyor belt, also widely called ball-top modular belt or sphere-top modular belt, is a type of engineering plastic modular conveyor belt fitted with freely rotating activated balls embedded on each module surface. Unlike normal flat-top or mesh modular belts that only push goods forward in one direction, the activated balls allow products to shift sideways, rotate, or divert at an angle while the belt runs continuously. It is a key component for automated sorting, transfer and orientation stations in modern material handling systems.

tire conveyor belt

Structure

The belt is assembled by interlocking plastic modules connected with hinge rods. Most modules are injection molded from POM, PP or PE, with precision sockets that hold small free-spinning balls. The balls stay locked inside the module and can roll independently when pushed from below by an auxiliary actuator or support plate—this is the “activated” design. When the activator is off, the balls sit flush and the belt works like a standard flat belt; when activated, the balls pop up slightly to enable cross-direction movement of cartons, packages or workpieces.

Common pitch sizes include 50.8 mm (2 inch), and open-area versions are available for food-grade washing and drainage requirements.

CY-50804Q omnidirectional ball joint

Working Principle

The base belt moves forward at a constant speed. Beneath the belt, segmented support plates or servo-driven actuators selectively lift the balls in target zones. Once activated, the rolling balls decouple the product from the belt’s forward motion. The product can then be pushed left, right, or rotated for scanning, labeling, merging, diverting and sorting. After the transfer action finishes, the balls drop back, and the product resumes travelling along the main conveyor direction. This design avoids complicated pusher arms or cross belt sorters for many medium-speed sorting lines.

conveyor belt

Core Advantages

1.Multi-directional transfer

Goods can be diverted, rotated or side-transferred without stopping the main conveyor, ideal for 90-degree transfer stations and sortation zones.

2.Modular repair

Damaged individual modules can be replaced separately, without removing the whole belt. Downtime and spare-part cost are much lower than solid rubber belts.

3.Flexible layout

It can run straight, curve, or work on inclined lines, matching compact factory layouts.

4.Hygienic and corrosion-resistant

POM and PP grades resist moisture, weak acid and detergent. Smooth surface with no gaps is easy to clean, suitable for food and beverage packaging lines.

5.Gentle product handling

Rolling contact reduces scratching and impact on cartons, boxes and finished packs.

Typical Applications

  • E-commerce and parcel logistics sorting lines
  • Packaging end-of-line transfer, rotating and labeling stations
  • Food, bakery and snack packaging conveyors
  • Tire manufacturing and heavy workpiece orientation
  • Assembly automation for household appliances and electronic products

Selection Tips

  • Confirm material: POM for general logistics and high friction; PP for low-temperature and corrosive environments.
  • Check ball size and load rating according to your product weight.
  • Match the belt pitch with your existing sprockets and drive unit.
  • Clarify whether you need food contact certification for food production.

Summary

Activated ball modular conveyor belts bring flexible multi-directional handling to standard plastic modular conveyor systems. It is a cost-effective solution to simplify sorting and transfer stations, widely adopted by logistics integrators and packaging equipment manufacturers. If you need stable, low-maintenance divert and rotation functions without a large sorter footprint, this belt is a reliable option.

More details, welcome to contact Shanghai Caiyang.

滚动至顶部