Shanghai Calyang Plastic Products
TEL:+86 17321328732
E-mail: sales@caiyangbelt.com

Modular plastic chain plate supplier

PP Plastic Slat Chain: Corrosion Resistance Analysis

Admin2026-11-10 

Metal conveyor chains suffer rust, pitting and rapid failure in wet, acidic, alkaline and regular washdown workshops. POM slat chains perform well in wear resistance, but its tolerance to strong chemical sanitizers is limited. As a widely used thermoplastic for conveyor slat chains, PP stands out mainly for its excellent corrosion and hydrolysis resistance. It has become the preferred choice for production lines exposed to frequent chemical cleaning and corrosive media. This article analyzes the corrosion performance of PP slat chains, compatible and incompatible chemicals, applicable scenarios, limitations and practical selection suggestions for conveyor system designers and buyers.

Core Corrosion Mechanism of PP Material

PP is a non-polar polyolefin. Its molecular structure has no easily hydrolyzable groups, so it will not react with water, dilute acid and dilute alkali under normal temperature. Unlike metal that fails by electrochemical rusting, PP will not produce oxidation corrosion in humid environments.

Corrosion damage to PP slat chains mainly comes from two ways:

1.Strong oxidizing chemicals break the carbon-carbon molecular chain, leading to chain embrittlement, cracking and discoloration.

2.Non-polar organic solvents penetrate into the molecular gap, causing swelling, softening and permanent deformation of the slat.

Chemical Compatibility Breakdown

Media with Excellent Resistance (Safe for Long-Term Contact)

1.Weak acids and medium-concentration non-oxidizing acids:hydrochloric acid, dilute sulfuric acid, citric acid, lactic acid, acetic acid. Widely used in meat, dairy and fruit processing lines with acidic raw materials or acidic cleaners.

2.Alkali solutions: sodium hydroxide, potassium hydroxide, common alkaline CIP cleaning detergents. This is the biggest advantage of PP slat chains compared with many other plastics.

3.Salt water and saline solutions: brine pickling, seafood processing, cold storage thawing lines. No salt spray corrosion occurs.

4.Water, hot water and steam cleaning: good hydrolysis resistance, suitable for repeated high-temperature rinse and daily full-line washdown.

5.Alcohol, sugar solution, vegetable oil and most food ingredients. Food-grade PP meets FDA requirements for direct food contact.

Media with Limited Resistance (Short contact only, not continuous exposure)

  • Weak oxidizing agents such as dilute hydrogen peroxide, low-concentration sodium hypochlorite. Long-time continuous soaking will gradually turn PP yellow and brittle.
  • Some low-polarity grease and essential oils: may cause slight swelling after long contact.
  • Note: Temperature amplifies corrosion risk. The same chemical will attack PP much faster at 80–90°C than at room temperature.

Incompatible Media (Strictly Avoid)

1.Strong oxidizing agents: concentrated nitric acid, concentrated chlorine bleach, strong oxidizing disinfectants. These oxidants break PP molecular chains quickly.

2.Aromatic and chlorinated solvents: xylene, toluene, trichloroethylene. PP will swell, soften and lose structural strength rapidly.

3.High-temperature concentrated sulfuric acid.

Compare Corrosion Performance: PP VS POM Slat Chain

This is the most frequent comparison for your customers:

PP: Winner in acid, alkali, hot water and chemical washdown. Poor wear resistance, higher friction, not suitable for high-speed dry running.

POM: Outstanding wear resistance, low friction, stable at high speed. Poor resistance to strong acid and alkaline cleaners; easy to degrade under long-time alkaline CIP cleaning.

Simple rule: Choose PP if your line runs heavy chemical cleaning every day; choose POM if it is dry packaging, high-speed bottle conveying with few chemical washes.

Suitable Industrial Scenarios Based on Corrosion Advantages

1.Meat, poultry and seafood processing: brine soaking, blood water, frequent alkaline foam cleaning.

2.Dairy and beverage CIP cleaning lines: regular hot water and alkaline sanitizer flushing.

3.Pharmaceutical and chemical packaging: exposure to mild chemical reagents.

4.Cold storage and frozen food conveying: low temperature+high humidity, condensation environment.

5.Electroplating and wastewater auxiliary conveying lines with dilute acid and alkali.

Key Limitations You Must Inform Customers

Corrosion resistance does not equal universal performance. PP slat chains have obvious weaknesses:

1.Wear resistance is inferior to POM. In high-speed, dry friction conditions, the chain hinge and sliding surface wear faster.

2.Continuous operating temperature range: roughly -40℃~90℃. Over-temperature will accelerate chemical attack and deformation.

3.UV resistance is poor. Long-term outdoor sunlight exposure will cause aging and embrittlement; add anti-UV modification if used outdoors.

4.Impact strength drops sharply at sub-zero temperature below -20℃.

Practical Selection & Maintenance Tips

1.Confirm cleaning formula first: Ask customers what detergent they use, PH value and cleaning temperature before quotation.

2.Matching components: If the whole line uses PP slat chain, the hinge pin can choose 316 stainless steel for better anti-corrosion matching; avoid ordinary 304 pins in heavy salt environment.

3.Cleaning suggestion: Reduce soaking time of high-concentration chlorine disinfectant. Rinse clean with fresh water immediately after sanitizing.

4.Sprocket matching: PP chain can match PP anti-corrosion sprockets or POM sprockets according to load; PP sprocket is also recommended for fully corrosive lines.

5.Sample test for special chemicals: For unfamiliar custom cleaning agents, arrange a small immersion test before mass installation.

Summary

PP slat chain is a professional corrosion-resistant conveying solution, whose core advantage lies in excellent tolerance to acid, alkali, hot water and repeated washdown. It fills the gap where metal chains rust and POM chains fail under strong alkaline cleaning.

It is not an all-purpose material, restricted by poor solvent resistance and average wear performance. Correct material selection depends on the chemical medium, cleaning cycle, temperature and running speed of the production line.

If you need food-grade PP slat chain with customized width, color or anti-oxidation modification, welcome to send technical requirements for drawing and quotation.

滚动至顶部